SR100-WD FTTH Passive Fiber Optical Node with WDM
Model Number: SR100-WD
Brand: Softel
MOQ: 1
No Power Required, Built-in WDM
Zinc-alloy Metal Casing
Perfectly Comply with EPON, GPON, FTTH Network
01
Product Description
Introduction
SR100-WD FTTH Fiber Optical Node with WDM is a mini indoor optical receiver without a power supply, designed for FTTP/FTTH applications, especially for is for digital television. High performance, low receiver optical power, and lower cost are FTTH solution's best selection for MSO. The built-in WDM integrated for 1550nm video signal and 1490nm /1310nm data signal in one fiber.
Reflection 1490nm/1310nm for connecting ONT device. They are very suitable for PON and TV system.
This machine adopts the high-sensitivity optical receiving tube, without a power supply, and no power consumption. When the input optical power output level Pin= -1dBm, Vo= 68dBuV, economic, flexible application integration, application of fiber to the home network.
It is Built-in CWDM, suitable for a single-fiber triple wavelength system, CATV operating Wavelength 1550nm, pass wavelength 1310/1490nm, and can conveniently connect the ONU of EPON, GPON.
Features
- Built-in PON WDM
- 1 GHz Operating Bandwidth
- 2 RF Outputs Optional
- Lower input optical range: +1 ~ -15dBm
- Output level up to 61.9 - 64.4dBuV, Digital TV (Pin= -1dBm)
- Customized logo and Packing Design Available
- Without Power Supply, and NO Power Consumption
NOTE
1. When using the RF connector, the RF input interface must be tightened to STB. Otherwise, the ground is bad and will cause high-frequency segments of Digital TV signals MER degradation.
2. Keep the optical connector clean, the bad link will cause too low an RF output level.
|
SR100-WD FTTH Passive Fiber Optical Node with WDM |
||||
|
Optic Feature |
Optic Feature |
Unit |
Index |
Supplement |
| CATV Work Wavelength |
(nm) |
1540~1560 |
|
|
| Pass Wavelength |
(nm) |
1310~1490 |
|
|
| Channel Isolation |
(dB) |
≥40 |
1550nm&1490nm |
|
|
Response |
(A/W) |
≥0.85 |
1310nm |
|
|
≥0.9 |
1550nm |
|||
| Receiving Power |
(dBm) |
+1~-15 |
|
|
| Optical return loss |
(dB) |
≥55 |
|
|
| Optical fiber connector |
|
SC/APC |
Input |
|
|
RF Feature |
Work bandwidth |
(MHz) |
45~1050MHz |
|
| Output level |
(dBμV) |
61.9 – 64.4 |
Digital TV (Pin= -1dBm) |
|
| Return loss |
(dB) |
≥14 |
47~862MHz |
|
| Output impedance |
(Ω) |
75 |
|
|
| Output port number |
|
1 |
|
|
| RF tie-in |
|
F-Female |
|
|
|
Digital TV Feature |
OMI |
(%) |
4.3 |
|
| MER |
(dB) |
34.7 – 35.5 |
Pin= -1dBM |
|
|
28.7 – 31 |
Pin= -13dBm |
|||
| BER |
|
<1.0E-9 |
Pin: +1~-15dBm |
|
|
General Feature |
Work temp |
(℃) |
-20~+55 |
|
| Storage temp |
(℃) |
-40~85 |
|
|
| Work relative temp |
(%) |
5~95 |
||
| Test Requency: 366MHz | ||||||
| Pin |
Output Leve(dBuV) |
MER |
Output Difference |
MER Difference |
||
| (dBm) | Max | Min | Max | Min | ||
|
0 |
65.1 |
63.2 |
35 |
33.6 |
1.9 |
1.4 |
|
-1 |
64.4 |
61.9 |
35.5 |
34.7 |
2.5 |
0.8 |
|
-2 |
63.1 |
60.7 |
36.3 |
35.4 |
2.4 |
0.9 |
|
-3 |
62.1 |
59.6 |
37.8 |
35.5 |
2.5 |
2.3 |
|
-4 |
60.7 |
58.5 |
39.2 |
35.2 |
2.2 |
4 |
|
-5 |
58.6 |
56.5 |
39.8 |
35.7 |
2.1 |
4.1 |
|
-6 |
57.2 |
55.2 |
39.8 |
35.7 |
2 |
4.1 |
|
-7 |
55.5 |
53.5 |
39.5 |
35.5 |
2 |
4 |
|
-8 |
53.4 |
51.5 |
39.2 |
34.7 |
1.9 |
4.5 |
|
-9 |
51.3 |
50 |
37.3 |
35.2 |
1.3 |
2.1 |
|
-10 |
49.8 |
48.3 |
35.9 |
34 |
1.5 |
1.9 |
|
-11 |
47.9 |
46.4 |
34.5 |
32.3 |
1.5 |
2.2 |
|
-12 |
45.8 |
44.5 |
32.8 |
30.5 |
1.3 |
2.3 |
|
-13 |
43.9 |
42.4 |
31 |
28.7 |
1.5 |
2.3 |
|
-14 |
41.9 |
40.6 |
29.4 |
26.8 |
1.3 |
2.6 |
|
-15 |
39.9 |
38.7 |
27.7 |
25.7 |
1.2 |
2 |
SR100-WD FTTH Passive Fiber Optical WDM Node Spec Sheet.pdf
