SOFTEL Module New Launch Single Fiber XGS-PON ONU Stick Transceiver
Model Number: SFP-XGSPON ONU STICK-UPC
Brand: Softel
MOQ: 1
Open to any brands of ONU
The transmitting end and receiving end achieve a speed of 9.953 Gb/s
Compliant with ITU-T G.988 OMCI Management
01
Product Description
The XGS-PON ONU stick transceiver is an Optical Network Terminal (ONT) with Small Form-factor Pluggable (SFP+) packaging. The XGS-PON ONU stick integrates a bi-directional (max 10Gbit/s) optical transceiver function and 2nd layer function. By being plugged into the customer premise equipment (CPE) with standard SFP port directly, the XGS-PON ONU stick provides multi-protocol link to the CPE without requiring separate power Supply.
The transmitter designed for single mode fiber and operates at wavelength of 1270nm. The transmitter uses a DFB laser diode and fully compliant with IEC-60825 and CDRH class 1 eye safety. It contains APC functions, a temperature compensation circuit to ensure compliance with ITU-T G.9807 requirements at operating temperature.
The receiver section uses a hermetic packaged APD-TIA (APD with trans-impedance amplifier) and a limiting amplifier. The APD converts optical power into electrical current and the current is transformed to voltage by the trans-impedance amplifier. The differential signals are produced by the limiting amplifier. The APD-TIA is AC coupled to the limiting amplifier through a low pass filter.
The XGS-PON ONU stick supports a sophisticated ONT management system, including alarms, provisioning, DHCP and IGMP functions for a stand-alone IPTV solution at the ONT. It can be managed from the OLT using G.988 OMCI.
Product Features
- Single Fiber XGS-PON ONU Transceiver
- 1270nm burst-mode 9.953 Gb/s transmitter with DFB laser
- 1577nm continuous-mode 9.953Gb/s APD-TIA receiver
- SFP+ package with SC UPC receptacle connector
- Digital diagnostic monitoring (DDM)with internal calibration
- 0 to 70°C operating case temperature
- +3.3V separated power supply, low power dissipation
- Compliant with SFF-8431/SFF-8472/ GR-468
- MIL-STD-883 compliant
- FCC Part 15 Class B/EN55022 Class B (CISPR 22B)/ VCCI Class B compliant
- Class I laser safety standard IEC-60825 compliant
- RoHS-6 compliance
Software Features
- Compliant with ITU-T G.988 OMCI Management
- Support 4K MAC entries
- Support IGMPv3/MLDv2 and 512 IP multicast address entries
- Support advanced data features such as VLAN tag manipulation, classification and filtering
- Support“Plug-and-play”via auto-discovery and Configuration
- Support Rogue ONU Detecting
- Data transferring at wire-speed for all packet size
- Support Jumbo frames up to 9840 Bytes
| Optical Characteristics | ||||||
| Transmitter 10G | ||||||
| Parameter | Symbol | Min | Typical | Max | Unit | Note |
| Center Wavelength Range | λC | 1260 | 1270 | 1280 | nm | |
| Side Mode Suppression Ratio | SMSR | 30 | dB | |||
| Spectral Width (-20dB) | ∆λ | 1 | nm | |||
| Average Launch Optical Power | POUT | +5 | +9 | dBm | 1 | |
| Power-OFF Transmitter Optical Power | POFF | -45 | dBm | |||
| Extinction Ratio | ER | 6 | dB | |||
| Optical Waveform Diagram | Compliant With ITU-T G.9807.1 | |||||
| Receiver 10G | ||||||
| Center Wavelength Range | 1570 | 1577 | 1580 | nm | ||
| Overload | PSAT | -8 | - | - | dBm | |
| Sensitivity(BOL Full temp) | Sen | - | - | -28.5 | dBm | 2 |
| Bit Error Ratio | 10E-3 | |||||
| Loss of Signal Assert Level | PLOSA | -45 | - | - | dBm | |
| Loss of Signal Deassert Level | PLOSD | - | - | -30 | dBm | |
| LOS Hysteresis | 1 | - | 5 | dBm | ||
| Receiver Reflectance | - | - | -20 | dB | ||
| Isolation (1400~1560nm) | 35 | dB | ||||
| Isolation(1600~1675nm) | 35 | dB | ||||
| Isolation(1575~1580nm) | 34.5 | dB | ||||
| Electrical Characteristics | ||||||
| Transmitter | ||||||
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
| Data Input Differential Swing | VIN | 100 | 1000 | mVp-p | ||
| Input Differential Impedance | ZIN | 90 | 100 | 110 | Ω | |
| Transmitter Disable Voltage – Low | VL | 0 | - | 0.8 | V | |
| Transmitter Disable Voltage – High | VH | 2.0 | - | VCC | V | |
| Burst Turn On Time | TBURST_ON | - | - | 512 | ns | |
| Burst Turn Off Time | TBURST_OFF | - | - | 512 | ns | |
| TX Fault Assert Time | TFAULT_ON | - | - | 50 | ms | |
| TX Fault Reset Time | TFAULT_RESET | 10 | - | - | us | |
| Receiver | ||||||
| Data Output Differential Swing | 900 | 1000 | 1100 | mV | ||
| Output Differentia Impedance | ROUT | 90 | 100 | 110 | Ω | |
| Loss of Signal (LOS) Assert Time | TLOSA | 100 | us | |||
| Loss of Signal(LOS) Deassert Time | TLOSD | 100 | us | |||
| LOS low voltage | VOL | 0 | 0.4 | V | ||
| LOS high voltage | VOH | 2.4 | VCC | V | ||
Absolute Maximum Ratings
| Parameter | Symbol | Min | Max | Unit | Note |
| Storage Ambient Temperature | TSTG | -40 | 85 | °C | |
| Operating Case Temperature | Tc | 0 | 70 | °C | C-Temp |
| Relative Humidity | RH | 5 | 85 | % | |
| Power Supply Voltage | VCC | 0 | 3.63 | V |
Recommended Operating Conditions
| Parameter | Symbol | Min | Typical | Max | Unit | Note |
| Operating Voltage | VCC | 3.14 | 3.3 | 3.46 | V | |
| Power Dissipation | PD | 3 | W | |||
| Operating Case Temperature | Tc | 0 | 70 | °C | C-Temp | |
| Operating Humidity Range | OH | 5 | 85 | % | ||
| Bit Rate(TX) | 9.953 | Gbit/s | ||||
| Bit Rate(TX) | 9.953 | Gbit/s | ||||
| Transmission Distance | - | - | 20 | KM |
SOFTEL Module Single Fiber XGS-PON ONU Stick Transceiver.pdf
